Menu
Search
Filters
Close
Menu

ICG

AUTOMATIC TRANSFER PANELS (ATS) MAINS-GENERATOR

(ICG) ATS / AMF Our control panels use the highest quality products and can be amended to your specification, and bespoke built to your requirements.

Please note additions' may require a larger enclosure.

 

STANDARD SPECIFICATION (TOP SPEC)

AC1 Rated Contactors or ACB's Mechanically and Electrically Interlocked.

  • Mild Steel Enclosure With Top & Bottom Gland Plate.
  • LED Light Indication for Mains Available, Mains On Load, Generator Available, Generator On Load.
  • Multi Function timers to prevent nuisance starting on minor breaks in the mains.
  • Mains 10 Amp Auxiliary output Supply for battery charger or other.
  • Mains & Generator auxiliary contacts for remote monitoring panels (BMS)

 

Some ATS panel require a D.C power source to operate (12vdc or 24 vdc), this is usually fed from the generator starting battery. However if this is not possible a alternative power supply can be supplied.

Optional Extras: 

  • Auto Test Facility Key Switch (mains failure simulation testing)
  • 7 Day Programmable Timer
  • Generator off load delay timer.
  • Audible Alarm on mains failure.
  • Audible Alarm on generator failure.

 

 

ATS / AMF PANEL & HOW DOES IT WORK

ATS panels are used where the local mains supply is backed up by an appropriately rated Generating set, with a 2 wire start facility. The ATS panel monitors the local mains supply and will request the generator to start if this supply should fail. The ATS panel will then control the switching of the load from the local supply to the generator with a adjustable time delay pre set to 30s. On restoration of the local mains supply the ATS panel will monitor the Supply to ensure it is stable and then transfer the load from the generator back to the mains supply also with a adjustable mains restoration timer pre set to 10s. Once this time has elapsed the ATS panel will request the generator to stop.  

If you have any additional requirements please contact one of our sales team.

Contact Us

View as
Sort by
Display per page
Picture of Changeover ATS - 40 Amp ICG Single Phase

Changeover ATS - 40 Amp ICG Single Phase

£650.50 incl tax
Here At Blades Power, we have a full range of Automatic Transfer Switches Manufactured In House Using . They are built to the highest standard, all panels are fully tested and issued with a serial No. Every Panel is dispatched with a copy of the Electrical Schematic and test report + All Datasheets for each electrical internal part.
Picture of Changeover ATS - 40 Amp ICG 3 Phase N

Changeover ATS - 40 Amp ICG 3 Phase N

£720.00 incl tax
Here At Blades Power, we have a full range of Automatic Transfer Switches Manufactured In House Using . They are built to the highest standard, all panels are fully tested and issued with a serial No. Every Panel is dispatched with a copy of the Electrical Schematic and test report + All Datasheets for each electrical internal part.
Picture of Changeover ATS - 60 Amp ICG 3 Phase N

Changeover ATS - 60 Amp ICG 3 Phase N

£778.50 incl tax
Here At Blades Power, we have a full range of Automatic Transfer Switches Manufactured In House Using . They are built to the highest standard, all panels are fully tested and issued with a serial No. Every Panel is dispatched with a copy of the Electrical Schematic and test report + All Datasheets for each electrical internal part.
Picture of Changeover ATS - 60 Amp ICG Single Phase

Changeover ATS - 60 Amp ICG Single Phase

£792.00 incl tax
Here At Blades Power, we have a full range of Automatic Transfer Switches Manufactured In House Using . They are built to the highest standard, all panels are fully tested and issued with a serial No. Every Panel is dispatched with a copy of the Electrical Schematic and test report + All Datasheets for each electrical internal part.
Picture of Changeover ATS -125 Amp ICG Single Phase

Changeover ATS -125 Amp ICG Single Phase

£840.00 incl tax
Here At Blades Power, we have a full range of Automatic Transfer Switches Manufactured In House Using . They are built to the highest standard, all panels are fully tested and issued with a serial No. Every Panel is dispatched with a copy of the Electrical Schematic and test report + All Datasheets for each electrical internal part.
Picture of Changeover ATS - 125 Amp ICG 3 Phase N

Changeover ATS - 125 Amp ICG 3 Phase N

£883.50 incl tax
Here At Blades Power, we have a full range of Automatic Transfer Switches Manufactured In House Using . They are built to the highest standard, all panels are fully tested and issued with a serial No. Every Panel is dispatched with a copy of the Electrical Schematic and test report + All Datasheets for each electrical internal part.

240v Single Phase

Picture for category 240v Single Phase

415v Three Phase

Picture for category 415v Three Phase

Filter by:

Clear All
Price range Clear
Min: £650 Max: £5,966
£650 £5966
Requirement Clear
Component Manufacture Clear
Amp Rating Clear
IP65 All Steel Enclosure Clear
IP55 All Steel Enclosure Clear
Categories
Manufacturers
View all
Popular tags
Contacts
  • Sales: +44 (0)1453 799655 / 821322
  • Fax: +44 (0)1453 799654
  • Service & repair: +44 (0)7968 504 488
  • blades-power
Information
Products
Sign up for our newsletter
Copyright © 2024 Blades Power Generation Ltd. All rights reserved. Developed by System 15 Ltd.
Powered by nopCommerce