What’s the difference between a single-phase ( Residential ) or three-phase ( Industrial ) electricity supply?
Both of these are electricity supplies from your current supplier, it’s the amount of power that is different. A single-phase supply is smaller than a three-phase supply meaning you cannot use as much power. A typical house will need a single-phase supply whilst a larger house, flats or commercial building will need a three-phase supply.
The way to tell what supply a property has is by looking at the fuse on the service head.
Single-phase has one 100amp fuse this will give you 240v, Fuse to Neutral
A three phase supply, has three 100amp fuses ( This can be larger depending on your demand ) Where a 3 Fuse system will give you 240v for each fuse to neutral but 415v fuse to fuse..
Hi Mark, Very pleased with the panel you built up for us and the way that is was packed, excellent and you understand the issues of couriers and how the contactors etc could be flung off etc. Well done.
Thanks for the response, in fact it is now working perfectly, the generator required to be in OFF mode to shut down from the ATS control. Fantastic product, thank you. Patrick
Discounts For Reviews!
Earn discount for 10 mins work!
We all know how important a Product Review can be when choosing a new item, but bothering to write one after purchasing is a hassle. So, just to give our customers a good reason, we will give any customer that submits 2 reviews a discount on their purchase per customer per month. Your review should be useful to a prospective customer, be no less than 20 words and not just negative like "this is rubbish, do not buy it"
Please email sales@bladespowergeneration.com with your 2 reviews (on products we are actively selling but not necessarily bought from us, and we will apply a discount credit to your account!
Call now to become a distributor of Blades Power Generation products.
Automatic Transfer Switch. Motorised Transfer Switch.
Typical Look Of A 100Amp ATS Typical Look Of A 630 Amp Unit
Single Line Bypass ATS Panel
Typical Look of a 70A Single Line Bypass
Automatic Transfer Switches with Single Or Dual Line Bypass & Primary & Secondary Isolation
The bypass isolation switch is designed for applications where maintenance, inspection and testing must be performed while maintaining continuous power to the building. This is typically required in critical life support systems and standby power situations calling for safe system maintenance with no power disruptions.
Single Line Bypass
With a single line bypass system, you switch from automatic to bypass this will direct the primary supply direct to the building load, you can then switch the primary / secondary isolator to off to give maintenance to the Automatic Transfer Switch.
Dual Line Bypass
This is similar to the single line bypass system except you can switch the bypass from primary or secondary depending on your power supply.
Please Call One of our friendly sales team for help with this product,
Sales Team on +44 (0) 1453 821322 - 799655
Alternatively, you can contact us through our Contacts Page